Manta Ray Anchors

O.D.S. Marine was involved in a 'first-of-it's-kind' job installing drive-in earth anchors through the ice. The installation rig we designed and built for the work was unique according to the anchor manufacturer in Colorado.

The Manta Ray anchors we installed are a new product based on an old idea. This particular application was to restrain floating docks at a marina, the first such installation in Canada. The anchors are so inexpensive and so small and have such high holding power, even in poor soil, that the applications are almost endless.

COMPARE

a 5,000 lb. concrete block loaded and unloaded with a crane, transported by flatbed and set into place.
a 5,000 lb. capacity Manta-Ray anchor that you can hold in one hand, take to a site with it's installation gear in the back of a pickup truck and install in ten minutes. Add to that the fact that if it is a water installation the concrete block is going to lose about a third of it's effective weight from buoyancy as soon as it hits the water.

We have the Specialized installation equipment and technology!

If we can be of any assistance, contact us!.

O.D.S. Marine Construction is a Canadian company specializing in Marine Construction and Engineering Services, Commercial Diving, Boat, Barge and Tug Rentals.

We use experienced personnel and the latest professional equipment, have $2,000,000+ liability insurance for marine work and are in good standing with the Workers' Compensation Board.

We have experienced personnel on staff with up to date training in first aid, CPR and WHMIS AND THE FOLLOWING SERVICES:

24 hour service;
5 radio equipped service trucks;
Pager equipped personnel;
Large inventory of marine equipment;
Fabrication shop;
Boom containment;
Video/still photography;
Professional reports;
$2,000,000+ liability coverage;
Contaminated diving;
Hydrostatic cylinder testing;
Air fill station

SCBA Servicing

Our trained staff can inspect, service and refill cylinders from Scott, Draeger, M.S.A., etc. up to 4500 psi at our CSA certified air station.
Contaminated Environments and Air Space Entry
We have specially trained personnel and equipment for working in contaminated environments.
Our trained personnel, available on a 24 hour basis, equipped with Scott-Paks, positive pressure breathing apparatus, Cascade system, and two way communications are available for contaminated air space entry.

Fabrication Shop

Our well equipped fabrication shop is used to supplement our customers' requirements as well as for our own equipment maintenance.
In fact, the majority of our floating equipment was built and designed in our shop by our personnel.